Biography

Fortinet NSE7_PBC-7.2復習範囲、NSE7_PBC-7.2試験復習

JapancertはFortinetのNSE7_PBC-7.2認定試験に受かりたい各受験生に明確かつ顕著なソリューションを提供しました。当社はFortinetのNSE7_PBC-7.2認定試験の詳しい問題と解答を提供します。当社のIT専門家が最も経験と資格があるプロな人々で、我々が提供したテストの問題と解答は実際の認定試験と殆ど同じです。これは本当に素晴らしいことです。それにもっと大切なのは、Japancertのサイトは世界的でNSE7_PBC-7.2試験トレーニングによっての試験合格率が一番高いです。

私たちは常に新しい知識を習得していますが、常に忘れられているプロセスであり、この問題を解決する方法を常に忘れてしまいます。答えは良い記憶方法を持つことです。NSE7_PBC-7.2試験問題はうまくいきます。この点について。 NSE7_PBC-7.2の実際の試験教材には独自の学習方法があり、従来の暗記学習を放棄し、テキストとグラフィックスの記憶方法の組み合わせなど、多様な記憶パターンを採用して、知識の記憶を区別します。 NSE7_PBC-7.2学習リファレンスファイルは非常に科学的で合理的であるため、安全に購入できます。

>> Fortinet NSE7_PBC-7.2復習範囲 <<

NSE7_PBC-7.2試験復習 & NSE7_PBC-7.2英語版

誰もが成功を望んでいますが、誰もが勉強に忍耐する強い心を持っているわけではありません。現在Fortinetのステータスに満足できない場合は、NSE7_PBC-7.2の実際の試験が役立ちます。 NSE7_PBC-7.2試験問題は、常に最高99％の合格率を誇っています。教材を使用すると、試験準備の時間を節約できます。 NSE7_PBC-7.2テストエンジンを選択すると、簡単に認定を取得できます。選択して、NSE7_PBC-7.2学習教材を購入し、今すぐ学習を開始してください！知識、Fortinet NSE 7 - Public Cloud Security 7.2実績と幸福があなたを待っています！

Fortinet NSE7_PBC-7.2 認定試験の出題範囲：

トピック
出題範囲

トピック 1

• 自動化: このセクションでは、自動化プロセスに必要な基本要素、展開を目的とした Terraform と Ansible の実装、および重要な Azure セキュリティ原則の概要に関する知識がテストされます。また、パブリック クラウド エコシステム内のルーティングの複雑さと制約、自動化ツールを使用して FortiGate-VM インスタンスを展開する方法、および AWS と Azure の両方の環境で Terraform を使用して Fortinet ソリューションをセットアップする手法についても詳しく説明します。

トピック 2

• トラブルシューティングと FortiCNP: このセクションでは、さまざまなクラウド関連の問題に対する問題解決戦略に焦点を当てています。AWS EC2 インスタンスとの接続の問題に対処する方法、SD-WAN 接続の問題を解決するアプローチ、Azure SDN コネクタに関連する問題を特定して修正する手法について説明します。さらに、クラウド環境における潜在的なセキュリティ リスクを検出して軽減するために FortiCNP を効果的に使用する方法についても説明します。

トピック 3

• 自動化ツールを使用した FortiGate-VM の導入: 試験のこの領域では、Fortinet のネットワークおよびセキュリティ プロフェッショナルを目指す人が、Terraform を使用して AWS および Azure に Fortinet ソリューションを導入する方法を学びます。さらに、Azure で HA ソリューションを構成する方法についても学びます。

トピック 4

• パブリック クラウドでの FortiGate の導入: このセクションでは、パブリック クラウド環境で利用できるさまざまな FortiGate ソリューションを認識する方法、トランジット VPC およびトランジット ゲートウェイ アーキテクチャを実装する方法、およびコンテナ セキュリティに関する Fortinet の製品を検討する方法について説明します。

 

Fortinet NSE 7 - Public Cloud Security 7.2 認定 NSE7_PBC-7.2 試験問題 (Q35-Q40):

質問 # 35
Refer to the exhibit.

You are configuring a second route table on a Transit Gateway to accommodate east-west traffic inspection between two VPCs_ However, you are getting an error during the transit gateway route table association With the Connect attachment.
Which action Should you take to fulfill your requirement?

• A. In the second route table: create a propagation with the Connect attachment.
• B. Add a static route in the Routes section
• C. Delete the both Connect and Transport attachments from the first TGW route table
• D. Add both Associations and Propagations in the second TGW route table.

正解：A

解説：
Explanation
The error message indicates that the Connect attachment is already associated with another transit gateway route table. You cannot associate the same attachment with more than one route table. However, you can propagate the same attachment to multiple route tables. Therefore, to fulfill your requirement of configuring a second route table for east-west traffic inspection between two VPCs, you need to create a propagation with the Connect attachment in the second route table. This will allow the second route table to learn the routes from the Connect attachment and forward the traffic to the securityVPC1. You also need to associate the second route table with the Transport attachment, which is the transit gateway attachment for the security VPC1.
References:
Transit gateway route tables - Amazon VPC | AWS Documentation
Getting started with transit gateways - Amazon VPC | AWS Documentation
Configuring TGW route tables | FortiGate Public Cloud 7.4.0 | Fortinet Document Library

 

質問 # 36
Refer to the exhibit

The exhibit shows a customer deployment of two Linux instances and their main routing table in Amazon Web Services (AWS). The customer also created a Transit Gateway (TGW) and two attachments Which two steps are required to route traffic from Linux instances to the TGWQ (Choose two.)

• A. In the TGW route table, associate two attachments.
• B. In the main subnet routing table in VPC A and B, add a new route with destination 0_0.0.0/0, next hop Internet gateway(IGW).
• C. In the TGW route table, add route propagation to 192.168.0 0/16
• D. In the main subnet routing table in VPC A and B, add a new route with destination 0_0.0.0/0, next hop TGW.

正解：A、D

解説：
According to the AWS documentation for Transit Gateway, a Transit Gateway is a network transit hub that connects VPCs and on-premises networks. To route traffic from Linux instances to the TGW, you need to do the following steps:
* In the TGW route table, associate two attachments. An attachment is a resource that connects a VPC or VPN to a Transit Gateway. By associating the attachments to the TGW route table, you enable the TGW to route traffic between the VPCs and the VPN.
* In the main subnet routing table in VPC A and B, add a new route with destination 0_0.0.0/0, next hop TGW. This route directs all traffic from the Linux instances to the TGW, which can then forward it to the appropriate destination based on the TGW route table.
The other options are incorrect because:
* In the TGW route table, adding route propagation to 192.168.0 0/16 is not necessary, as this is already the default route for the TGW. Route propagation allows you to automatically propagate routes from your VPC or VPN to your TGW route table.
* In the main subnet routing table in VPC A and B, adding a new route with destination 0_0.0.0/0, next hop Internet gateway (IGW) is not correct, as this would bypass the TGW and send all traffic directly to the internet. An IGW is a VPC component that enables communication between instances in your VPC and the internet.
[Transit Gateways - Amazon Virtual Private Cloud]

 

質問 # 37
Refer to the exhibit.

You have deployed a Linux EC2 instance in Amazon Web Services (AWS) with the settings shown on the exhibit What next step must the administrator take to access this instance from the internet?

• A. Allocate an Elastic IP address and assign it to the instance.
• B. Enable source and destination checks on the instance
• C. Configure the user name and password.
• D. Enable SSH and allocate it to the device

正解：A

解説：
Elastic IP (EIP) Requirement: By default, when an EC2 instance is launched in AWS, it receives a public IP address from Amazon's pool, which is not static. This IP address can change, for example, if the instance is stopped and started again. To have a static IP address, you need to allocate an Elastic IP (EIP), which is a persistent public IP address, and then associate it with the instance.
Public Accessibility: Without an Elastic IP, the instance may not be accessible over the internet after a reboot or stop/start sequence. Assigning an Elastic IP ensures the instance can be accessed consistently using the same IP address.
Explanation:
The next step the administrator must take to access the Linux EC2 instance from the internet is:

 

質問 # 38
You are adding a new spoke to the existing transit VPC environment using the AWS Cloud Formation template. Which two components must you use for this deployment? (Choose two.)

• A. The Amazon CloudWatch tag value.
• B. The BGPASN value used for the transit VPC.
• C. The tag value of the spoke
• D. The OSPF AS value used for the hub.

正解：B、C

解説：
When using an AWS CloudFormation template to add a new spoke to an existing transit VPC environment, the necessary components are:
* The BGPASN value used for the transit VPC (Option C):BGP Autonomous System Number (ASN) is required for setting up BGP routing between the transit VPC and the new spoke. This number uniquely identifies the system in BGP routing and is crucial for correct routing and avoiding routing conflicts.
* The tag value of the spoke (Option D):Tags in AWS are used to identify and manage resources. The tag value assigned to a spoke VPC helps in organizing, managing, and locating the VPC within the larger AWS environment. Tags are essential for automation scripts and policies that depend on specific identifiers to apply configurations or rules.
References:AWS CloudFormation and AWS Transit Gateway documentation provide guidance on the use of BGPASN and tags for managing and automating VPC deployments effectively.

 

質問 # 39
Refer to the exhibit

A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Linux1 and Linux2 instances to the internet through the security VPC (virtual private cloud). The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface. Assume there are no issues with the Transit Gateway (TGW) configuration Which two settings must the customer add to correct the issue? (Choose two.)

• A. Both landing subnets in the spoke VPCs must have a 0.0 00/0 traffic route to the TGW
• B. Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.
• C. The four landing subnets in all the VPCs must have a 0.0 0 0/0 traffic route to the TGW
• D. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the Internet Gateway (IOW).

正解：A、B

解説：
The correct answer is B and C. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the TGW. Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.
According to the AWS documentation for Transit Gateway, a transit gateway is a network transit hub that connects VPCs and on-premises networks. To send outbound traffic from the Linux instances to the internet through the security VPC, you need to do the following steps:
In the main subnet routing table in the spoke VPCs, add a new route with destination 0.0.0.0/0, next hop TGW. This route directs all traffic from the Linux instances to the TGW, which can then forward it to the appropriate destination based on the TGW route table.
In the main subnet routing table in the security VPC, add a new route with destination 0.0.0.0/0, next hop FortiGate port2. This route directs all traffic from the TGW to the FortiGate internal interface, where it can be inspected and allowed by the FortiGate policies.
The other options are incorrect because:
Adding a 0.0.0.0/0 traffic route to the Internet Gateway (IGW) in the spoke VPCs is not correct, as this would bypass the TGW and the security VPC and send all traffic directly to the internet.
Adding a 0.0.0.0/0 traffic route to the TGW in all the VPCs is not necessary, as only the spoke VPCs need to send traffic to the TGW. The security VPC needs to send traffic to the FortiGate port2.
: Transit Gateways - Amazon Virtual Private Cloud : Fortinet Documentation Library - Deploying FortiGate VMs on AWS

 

質問 # 40
......

多くのIT者がFortinetのNSE7_PBC-7.2認定試験を通してIT業界の中で良い就職機会を得たくて、生活水準も向上させたいです。でも多くの人が合格するために大量の時間とエネルギーをかかって、無駄になります。同等の効果は、Japancertは君の貴重な時間とお金を節約するだけでなく１００％の合格率を保証いたします。もし弊社の商品が君にとっては何も役割にならなくて全額で返金いたいます。

NSE7_PBC-7.2試験復習: https://www.japancert.com/NSE7_PBC-7.2.html

• NSE7_PBC-7.2試験情報 📒 NSE7_PBC-7.2受験記 😙 NSE7_PBC-7.2受験対策解説集 ⏸ ➤ www.jpshiken.com ⮘を開いて⮆ NSE7_PBC-7.2 ⮄を検索し、試験資料を無料でダウンロードしてくださいNSE7_PBC-7.2ソフトウエア
• NSE7_PBC-7.2試験の準備方法｜便利なNSE7_PBC-7.2復習範囲試験｜最高のFortinet NSE 7 - Public Cloud Security 7.2試験復習 🧿 「 www.goshiken.com 」で▶ NSE7_PBC-7.2 ◀を検索して、無料で簡単にダウンロードできますNSE7_PBC-7.2ソフトウエア
• NSE7_PBC-7.2問題数 🕜 NSE7_PBC-7.2出題範囲 🕧 NSE7_PBC-7.2学習範囲 🐌 ➡ www.passtest.jp ️⬅️を入力して➡ NSE7_PBC-7.2 ️⬅️を検索し、無料でダウンロードしてくださいNSE7_PBC-7.2試験対策
• NSE7_PBC-7.2試験の準備方法｜便利なNSE7_PBC-7.2復習範囲試験｜最高のFortinet NSE 7 - Public Cloud Security 7.2試験復習 😈 ⮆ www.goshiken.com ⮄には無料の▛ NSE7_PBC-7.2 ▟問題集がありますNSE7_PBC-7.2受験資料更新版
• NSE7_PBC-7.2試験解説問題 🚢 NSE7_PBC-7.2試験情報 🦢 NSE7_PBC-7.2試験対策 📫 今すぐ➡ www.jpshiken.com ️⬅️で▷ NSE7_PBC-7.2 ◁を検索し、無料でダウンロードしてくださいNSE7_PBC-7.2受験記
• Fortinet NSE7_PBC-7.2復習範囲 は主要材料 - NSE7_PBC-7.2復習範囲: Fortinet NSE 7 - Public Cloud Security 7.2 🎫 ▛ www.goshiken.com ▟にて限定無料の[ NSE7_PBC-7.2 ]問題集をダウンロードせよNSE7_PBC-7.2問題数
• NSE7_PBC-7.2過去問無料 🦋 NSE7_PBC-7.2試験解説問題 🛫 NSE7_PBC-7.2試験対策 🤞 今すぐ⏩ www.goshiken.com ⏪を開き、➠ NSE7_PBC-7.2 🠰を検索して無料でダウンロードしてくださいNSE7_PBC-7.2練習問題集
• NSE7_PBC-7.2試験情報 🧳 NSE7_PBC-7.2復習問題集 💸 NSE7_PBC-7.2問題数 🚻 ➥ www.goshiken.com 🡄に移動し、「 NSE7_PBC-7.2 」を検索して、無料でダウンロード可能な試験資料を探しますNSE7_PBC-7.2資格準備
• 信頼的なNSE7_PBC-7.2復習範囲一回合格-ハイパスレートのNSE7_PBC-7.2試験復習 💎 ▷ www.pass4test.jp ◁は、✔ NSE7_PBC-7.2 ️✔️を無料でダウンロードするのに最適なサイトですNSE7_PBC-7.2資格準備
• 有難いNSE7_PBC-7.2 | 認定するNSE7_PBC-7.2復習範囲試験 | 試験の準備方法Fortinet NSE 7 - Public Cloud Security 7.2試験復習 🕑 今すぐ【 www.goshiken.com 】で【 NSE7_PBC-7.2 】を検索し、無料でダウンロードしてくださいNSE7_PBC-7.2資格準備
• NSE7_PBC-7.2過去問無料 🔑 NSE7_PBC-7.2出題内容 🔛 NSE7_PBC-7.2過去問無料 🧉 ウェブサイト➽ www.passtest.jp 🢪を開き、▛ NSE7_PBC-7.2 ▟を検索して無料でダウンロードしてくださいNSE7_PBC-7.2ソフトウエア
• motionentrance.edu.np, uniway.edu.lk, chillimath.com, lms.statmodeller.com, wirelesswithvidur.com, shortcourses.russellcollege.edu.au, gracead593.bloggip.com, afrifin.co.za, ncon.edu.sa, academy.hbaservices.com